Proximity Card Readers and Cards by AMTEL

IDC80 is a very thin, truly credit card thickness (0.8mm)of contactless proximity card and it has very flat surface to apply any photo ID on both sides of card. IDC80 is pre-programmed at the factory with AMTEL's unique encryption code and it has very flexible data format to meet any customer's requirement and any OEM format up to 64 bit ID is also available. It can be supplied without code and customer can write their unique code by using STAR PGM1000 Programming Devices with Programming software. IDC80 has 2 punch hole marks on the back side and can also be slot punched either vertically or horizontally and also available with a Magnetic Stripe and smart chip for use with other systems.

Proximity Card Readers and Cards by HID

HID offers a broad range of readers with read range from 2" to 24". Cards are available for standard applications and for Photo-ID applications. Compatible key tags are also available. Proximity cards are preferred because they are easy to use (many times you don't even need to take them out of the wallet or purse), vandal-resistant, secure, reliable, long life and extremely user friendly. They can individually coded and canceled, and can be used with practically any access control panel that will accept a Wiegand or RS232 signal. Uses passive (no battery) cards that are almost as thin as a typical credit card.

Proximity Card Readers and Cards - INDALA

Indala provides a full array of card readers (with varying read ranges) and a complete selection of cards and tags. Cards are available in standard format or in the Direct Print format for high volume Photo-ID badging applications. Key chain mountable tags are also available. Proximity Readers and Cards are preferred because they are extremely User Friendly (many times you don't even need to take them out of the wallet or purse), vandal-resistant, secure and reliable. They can be individually coded and canceled, and can be used with most access control panels. Note: Read range shown below with photos is achievable with ASC-121T hard plastic lifetime cards. Range with other cards and tags will be lower.

RF-ID Readers

An RFID system consists of two major components - a reader and a transponder (or tag). They work together to provide a non-contact solution to uniquely identify people, objects or vehicles. RFID does not require line of- sight between the tag and the reader and works effectively in dirty environments.

The reader consists of an antenna, a RF receiver and processing circuitry. The antenna couples the electromagnetic energy transmitted by the Tag to the Reader. The processing circuitry of the reader decodes the received information and sends the data to a Host Computer or a Control Device/Panel. The Reader read ranges could be programmed using dedicated software. Different types of Antenna can be connected to the reader to alter the field of reception.